Closest projects to superpad in the index. If they solve the same problem,
the maintainers may gain more from collaborating than from building in parallel.
-
6-button Megadrive pad adapter for Amiga with autofire
-
Clone of the Amiga CD32 Joypad circuit
-
A 16f84 adapter for using a PSX pad on Amiga/CD32
-
Genesis/MegaDrive gamepad to C64/Amiga adapter, with 3 button support and switchable button map
-
Playstation to Commodore Amiga/CD32 Controller Adapter
-
A simple firmware for STM32 microcontrollers that allow you to use an old Amiga keyboard as USB HID compatible keyboard with your computer.
-
An attempt at building an automatic Amiga Mouse/Joystick switch (when used with Amiga port 1) - pushing the button changes the device connected. No more two-cable Merengue for me on the Amiga 500, forever more!
-
Use modern Bluetooth gamepads on your Amiga 500 (and others)
-
A hack initially for Moderskeppet Gaming geek cruise, I managed to drive a telephone off a 9V battery and pick up the keypad tones as input to act as an Amiga joystick, allowing the TV classic Hugo game to be played...
-
First Class HID controller to AMIGA (Atari, etc..) adaptor and converter
-
Amiga KeyJAM USB to Amiga Keyboard, Joystick, and Mouse adapter
-
Safely connect your Sega Mega Drive/Genesis controllers to your Commodore 64 or Amiga
-
AKAB (Amiga Keyboard Adapter Board) is an AVR based PS/2 to Amiga keyboard adapter, released under GPLv3. This is not by me, it is from https://gitlab.com/hkzlab-retrocomputing/AKAB_Reloaded .
-
Adapter for connecting SEGA Gamepad to Amiga and C64
-
A collection of retro controller USB adapters (SNES, NES, Mega Drive/Genesis, Master System, Atari, Commodore, Amiga and Amiga CD32)
-
Open hardware retro joystick for Commodore 64, Amiga and compatible systems
-
SNES2DB9 is a software package to allow implementation of a converter to connect a SNES style gamepad with shift register to a system using the Atari DB9 joystick standard (Atari 2600, C64, Amiga, Atari ST, etc.)
-
An arcade controller project for the MiSTer FPGA project and any other device accepting USB HID joysticks. Up to 12 buttons are supported. Can also be used to create NeoGeo/Atari/Commodore/Amiga controller to USB adapters.
-
Super Nintendo Controller -> Commodore 64/Amiga 9-pin controller port
-
Analogue joystick for ACE
-
Little pcb to use an SNES Controller on an C64/Amiga/Atari
-
Arcadia Systems Amiga 500 based arcade PCB related files/projects
-
an arduino interface for amiga joysticks
-
Tekno kit from Catus - Electronics controller using your Amiga
-
Amiga Numpad using Teensy++ 2.0 micro controller