Closest projects to AtariStick in the index. If they solve the same problem,
the maintainers may gain more from collaborating than from building in parallel.
-
8 bit C64/Amiga/Atari Joystick to USB adapter
-
Connect an Atari/Amiga joystick or mouse to your PC using USB
-
USB HID mouse/gamepad to DB9 adapter for Atari ST, Amiga, C64 — CH554T MCU, KiCad 10 schematic, SDCC firmware
-
Control both Mouse and Game ports of your Amiga/Atari with two USB Controllers
-
USB interface for Amiga jojstick.
-
USB mouse interface for Atari ST/Amiga DB9 connector
-
For use with the Atari C64 Amiga Joystick v3.1 by Retronic Design
-
A project to connect a Commodore Amiga mouse, (Atari) joystick and Amiga Keyboard as USB HID devices.
-
An Amiga/C64/Atari joystick to USB adapter for 4 joysticks using an RPi Pico
-
Improve your retro gaming emulation experience by using the systems original controller.
-
An arcade controller project for the MiSTer FPGA project and any other device accepting USB HID joysticks. Up to 12 buttons are supported. Can also be used to create NeoGeo/Atari/Commodore/Amiga controller to USB adapters.
-
A retro arcade Joystick that has both a D Sub 9 pin plug to connect to period hardware like C64 or Amiga, and via USB to modern hardware, to be used with Emulators like Vice or FS-UAE.
-
SNES2DB9 is a software package to allow implementation of a converter to connect a SNES style gamepad with shift register to a system using the Atari DB9 joystick standard (Atari 2600, C64, Amiga, Atari ST, etc.)
-
Arduino AT32U4 HID driver for DB9 port joysticks, paddles, and Amiga mouse
-
an arduino interface for amiga joysticks
-
My old USB stack for AROS