Closest projects to Acorn-Joystick-Adapter in the index. If they solve the same problem,
the maintainers may gain more from collaborating than from building in parallel.
-
PCB Design for USB Keyboard Adapter for Amiga 600 - uses Teensy++ 2.0 and QMK Firmware
-
An attempt at building an automatic Amiga Mouse/Joystick switch (when used with Amiga port 1) - pushing the button changes the device connected. No more two-cable Merengue for me on the Amiga 500, forever more!
-
-
AKAB (Amiga Keyboard Adapter Board) is an AVR based PS/2 to Amiga keyboard adapter, released under GPLv3. This is not by me, it is from https://gitlab.com/hkzlab-retrocomputing/AKAB_Reloaded .
-
Amiga KeyJAM USB to Amiga Keyboard, Joystick, and Mouse adapter
-
AKAB (Amiga Keyboard Adapter Board) is an AVR based PS/2 to Amiga keyboard adapter, released under GPLv3
-
Simple PCB to test Commodore 64/Amiga style joysticks
-
A USB keyboard adapter for the Amiga 500 based on the RP2040 for JLCPCB Assembly
-
Use USB Keyboards, Mice and Joysticks on PC/XT, PC/AT, Tandy 1000, Atari, Amiga, C64 and Apple
-
Big Box Amiga Action Replay III remake
-
A little PCB to buld a SCART cable for console and old computers
-
Little pcb to use an SNES Controller on an C64/Amiga/Atari
-
A simple circuit to allow merging stereo input channels
-
A retro arcade Joystick that has both a D Sub 9 pin plug to connect to period hardware like C64 or Amiga, and via USB to modern hardware, to be used with Emulators like Vice or FS-UAE.
-
Analogue joystick for ACE
-
A remake of the Phoenix Microtechnologies AP420 with mono input and TRS microphone jack.
-
NES controller replacement board for C64, Amiga, Atari