Closest projects to Amiga-VideoSlot-RGBtoHDMI in the index. If they solve the same problem,
the maintainers may gain more from collaborating than from building in parallel.
-
Amiga RGB2HDMI test tool used to verify boards do not have sparkling artifacts
-
-
Add a digital video port to vintage Amiga machines
-
Amiga Video Slot to HDMI Adapter
-
This project implements a circuit board which plugs into a big-box Amiga Video Slot (A2000, A3000, A4000) and uses a Raspberry Pi Zero to process the Amiga display video and audio in realtime and provide HDMI video...
-
Documentation of RGBtoHDMI on Amiga 500
-
LinuxJedi's designs for Amiga RGBtoHDMI boards.
-
Double buffered, impedance matched, no vertical lines VGA adapter for all Amigas
-
Another one RGB to HDMI solution for the Amiga 600
-
A tester for Amiga RGBtoHDMI boards
-
CPLD and standard low profiles versions of the AMIGA RGBtoHDMI
-
The Ultimate Amiga RGB to VGA filtered buffered let-those.ugly-barrels-away adapter
-
An AGA digital scandoubler and HDMI output card for the Amiga 4000, with Amiga 2000 / 3000 support.
-
A small back panel PCB to house HDMI and several switches...
-
A breakout/riser board for the CD32, based on the Terriblefire design. Added extra video circuitry, some power supply essentials, PC to Amiga keyboard adaptor and an RS232 serial port.
-
RGB to SVideo converter for Amiga computers
-
This project is an FPGA-based solution for the Commodore Amiga, specifically designed to eliminate the flicker issue in its native video output. The Amiga Flicker Fixer reads digital RGB directly from the Super...
-
An open source flicker fixer for Amiga 500/2000
-
Luma Chroma output from A500
-
-
Design files and instructions for brackets used for cards that plug into big box Amiga computers
-
A video converter for classic Amiga computers to modern HDMI displays
-
This is an arduino project to control a Dell FP 2001 monitor's OSD menu to auto-configure it for an Amiga 500.
-
MAME 0.106 AmigaOS 68k native RGB/HAM/EHB display port and optimization project
-
AmigaOS CLI utility for switching the HDMI monitor input directly through DDC/CI from an Emu68/PiStorm system.
-
Amiga Video to VGA adapter and Monitor Switcher all in one
-
Patch Realtek monitor firmware (HP E190i, ThinkVision LT1913p) to accept 15 kHz video, plus 4:3, DOS 400-line and auto adjust fixes
-
-
A grid board for the Amiga Zorro slot
-