Closest projects to Amiga_DB23_video_adapter in the index. If they solve the same problem,
the maintainers may gain more from collaborating than from building in parallel.
-
Adapter to allow the use of the A500+/A600 Agnus (390544 8375 ) in an Amiga A3000
-
Double buffered, impedance matched, no vertical lines VGA adapter for all Amigas
-
The Ultimate Amiga RGB to VGA filtered buffered let-those.ugly-barrels-away adapter
-
-
Small board to add component video to my Amiga
-
Extend your amiga RGB video signal to two display units - screens, monitors, etc, simultaneously
-
Add a digital video port to vintage Amiga machines
-
Universal 1084S Monitor Adapter – DIN ↔ DE9 RGB Adapter/Monitor for Amiga, Tandy, and analog/digital RGB 1980's computers
-
A breakout/riser board for the CD32, based on the Terriblefire design. Added extra video circuitry, some power supply essentials, PC to Amiga keyboard adaptor and an RS232 serial port.
-
-
-
RGB to SVideo converter for Amiga computers
-
Simple adapter board for experimenting with connecting 3.3V devices to Amiga clockport
-
Luma Chroma output from A500
-
This project is an FPGA-based solution for the Commodore Amiga, specifically designed to eliminate the flicker issue in its native video output. The Amiga Flicker Fixer reads digital RGB directly from the Super...
-
Amiga Video to VGA adapter and Monitor Switcher all in one
-
A little PCB to buld a SCART cable for console and old computers
-
This is an arduino project to control a Dell FP 2001 monitor's OSD menu to auto-configure it for an Amiga 500.
-
This adapter plugs into the rear of the Amiga 1000 on the parallel port to change the pinout for non-Amiga 1000 parallel devices.
-
Native Amiga and RTG video switcher concept design. Current schematic would use a switch to select one or other of the inputs.
-
S-Video amp for CXA1145 encoders, based on the circuit used in the Amiga CD32