Closest projects to OpenSwitcher in the index. If they solve the same problem,
the maintainers may gain more from collaborating than from building in parallel.
-
Amiga 600 and 1200 Microprocessor controlled drive switcher
-
Yet Another (Amiga) FDD Swapper
-
Open Hardware Floppy Drive Swapper for Amiga Computers
-
An Amiga 1000-500-2000-3000 DF0: - External Floppy Drive Swapper
-
Amiga DF0: / DF1: (_SEL0/_SEL1) internal automatic drive switch using Arduino Pro Mini and minimal hardware.
-
Connect two floppy drives inside an Amiga computer and choose which one to boot from
-
An attempt at building an automatic Amiga Mouse/Joystick switch (when used with Amiga port 1) - pushing the button changes the device connected. No more two-cable Merengue for me on the Amiga 500, forever more!
-
Amiga 500 DF selector
-
Open Hardware Automatic Mouse/Joystick Switcher for Amiga Computers
-
FlashFloppy and FF_OSD, and now Amiga-dual-floppy-selector on a single board, for the Amiga 600
-
Amiga 7 segment floppy drive display monitor
-
Control Amiga add-on boards through mouse buttons
-
Amiga 3000 ROM bank switcher for U180/U181 sockets allowing 27C800, 27C160, and MX29F1615 parts to be installed and easily switch between chunks using jumpers or switches
-
A small mod board to provide a DSKRDY signal for drives which don't supply one
-
Very small app to switch the audio filter/power led of an Commodore Amiga
-
Amiga 3000 ROM bank switcher for U182/U183 sockets (replaces the ROM Tower board, allowing normal 27C400/800/160 parts. User can select which bank to use either by jumpers or switches
-
This is a 4 way Amiga ROM switcher built using a low profile solution. Tested on the Amiga 600.
-
Amiga DF0 / DF1 Switch
-
AmigaOS CLI utility for switching the HDMI monitor input directly through DDC/CI from an Emu68/PiStorm system.
-
Amiga program to control a Extron DSC 301 HD via Serial or USB
-
Simple ROM bank switcher for Amiga
-
The cheapest KVM switch ever (AmigaOS)
-
-
STM8S MCU source code that bit-bangs selectable 50/60Hz tick source for Amiga 1/2/3000 PSU replacements.
-
Native Amiga and RTG video switcher concept design. Current schematic would use a switch to select one or other of the inputs.
-
Config-driven AmigaOS partition switcher (Assign-based, no RDB tampering)