Closest projects to clockport_pi_interface in the index. If they solve the same problem,
the maintainers may gain more from collaborating than from building in parallel.
-
A314 is a family of expansions for Amiga computers that lets a Raspberry Pi (RPi) be used as a co-processor to the Amiga
-
Direct Raspberry Pi → Amiga custom chip I/O → Native Linux tools for driving real Amiga hardware (Paula, CIA, DMA, etc.) from a Raspberry Pi — no emulation.
-
8MB FastRAM Board for the Amiga 500 & Amiga 500+
-
Open Hardware RTC module for the Amiga 1200.
-
SPIder is an adapter that interfaces SPI devices to the clockport on an Amiga
-
Amiga 600 Accelerator And RAM Expansion
-
Replace the old 44256 DRAM chips on your A500 with newer SRAM memory
-
1 MB Chip RAM Expansion with RTC for the Amiga 600
-
Open Hardware 1 MB Chip RAM Expansion for the Commodore Amiga 600 Computer
-
An adaptor to convert Amiga 2000 slot processors to 68K socket.
-
Simple adapter board for experimenting with connecting 3.3V devices to Amiga clockport
-
Socket shift, CPU switch, Clockports for Amiga mITX "Denise"
-
Let your Amiga share Raspberry Pi resources - Amiga side.
-
-
Example code for connecting CoolRunner II starter board to Amiga through clockport interface
-
Implementation of the intel 8259 for arOS, a Programmable Interrupt Controller