Closest projects to A500keyboard in the index. If they solve the same problem,
the maintainers may gain more from collaborating than from building in parallel.
-
A USB keyboard adapter for the Amiga 500 based on the Pi Stamp RP2040
-
Amiga 600 USB Keyboard Adapter Using Raspberry Pi Pico and CircuitPython
-
Use USB input devices on Amiga computers, using the excellent Raspberry Pi Pico as a USB-to-bitbang adapter.
-
A USB keyboard adapter for the Amiga 2000 based on the Pi Stamp RP2040
-
A USB keyboard adapter for the Amiga 500 based on the RP2040 for JLCPCB Assembly
-
PCB Design for USB Keyboard Adapter for Amiga 600 - uses Teensy++ 2.0 and QMK Firmware
-
Amiga 500 Custom Mechanical Keyboard
-
-
-
USB and Bluetooth HID bridge for retro computers: Amiga keyboard and DE9 ports, C64, USB device for C64 Ultimate. RP2350 board, firmware and case. Based on borb/amigahid-pico.
-
Pi Pico + parts -> Amiga CD 32
-
This Arduino sketch converts an original Amiga 500 keyboard into a USB HID, allowing it to function as a modern USB keyboard. The sketch reads the Amiga 500 keyboard signals and translates them into USB keystrokes,...
-
This is a simple adapter for the Amiga 500 which routes the IDE activity signal to the keyboard Floppy LED. Floppy activity will still be shown normally.
-
Replacement Amiga 500 Mitsumi keyboard controller
-
Amiga Hardware Keyboard Reader
-
a keypad with 2 rp2040s with QMK that can control 2 old Amiga 600s
-