Open source projects 49 subscribe: Atom · RSS (this filter)
Starting a project? Describe it first: the closest existing projects, by meaning, so nobody builds the same thing twice.
-
CF-IDE Adapter for Vampire
-
SPI adapter that connects to the parallel port of an Amiga
-
A PCB for creating Amiga SCART or Amiga VGA cables. You can also use this adapter to feed a new clock to the Amiga via XCLK making your machine true PAL/NTSC switchable
-
Adapter to allow the use of the A500+/A600 Agnus (390544 8375 ) in an Amiga A3000
-
SD Card Adapter for Vampire
-
asig/amiga-mouse-adapter github
A short Arduino Sketch that transforms an Amiga Joystick to a mouse.
-
tebl/Amiga-Mouse-Switch github
An attempt at building an automatic Amiga Mouse/Joystick switch (when used with Amiga port 1) - pushing the button changes the device connected. No more two-cable Merengue for me on the Amiga 500, forever more!
-
reinauer/Paula-Int-Adapter github
Cheap "Action Replay" clone for Amiga 500/2000
-
reinauer/novOSC github
DIP14/DIP8 adapter for SMD oscillators in retro computer systems
-
With this adapter you can connect Amiga CD32 gamepads and Commodore/Amiga/Atari joysticks to a PC, Raspberry PI, MiSTer FPGA etc.
-
Convert an ATX power supply to an A2000 one.
-
asig/amiga-ps2-mouse-adapter github
An Arduino based adapter to use a PS/2 mouse with your Amiga.
-
Move your Amiga 2000 CPU to the Coprocessor slot!
-
PCB for PS/2 to Amiga keyboard adapters
-
Allows use of regular EPROMS on Amiga 500 Rev 5 boards
-
arnljot/dataflyer2650 github
DataFlyer2650: 26-pin to 50-pin SCSI adapter for the DataFlyer 1200 SCSI+ and Phase5 Blizzard IV SCSI kit (KiCad 10, CERN-OHL-S-2.0)
-
jbilander/SF2000 github
Spitfire 2000, A low-end 42 MHz Accelerator with IDE and 4/8 MB fast RAM for the Amiga 2000 co-pro slot (or A500 through an adapter).
-
thinghacker/amiga600_usb_pcb github
PCB Design for USB Keyboard Adapter for Amiga 600 - uses Teensy++ 2.0 and QMK Firmware
-
Safely connect your Sega Mega Drive/Genesis controllers to your Commodore 64 or Amiga
-
An arcade controller project for the MiSTer FPGA project and any other device accepting USB HID joysticks. Up to 12 buttons are supported. Can also be used to create NeoGeo/Atari/Commodore/Amiga controller to USB adapters.
-
opengiveback/eqUInput github
eqUInput is a PCB for Arduino Nano based PS/2 mouse or PC Gameport joysticks to Amiga mouse adapters
-
reinauer/68040-to-68060 github
Motorola 68040 to 68060 adapter
-
jimbro1000/A500keyboard github
hardware Raspberry Pico Amiga 500 Keyboard to USB Adapter
-
retronicdesign/AmigaMidi github
An Amiga Serial Midi Interface in open hardware
-
reinauer/Amiga-Boot-Selector github