Open source projects 34 subscribe: Atom · RSS (this filter)
Starting a project? Describe it first: the closest existing projects, by meaning, so nobody builds the same thing twice.
-
screwbreaker/ScartPCB github
A little PCB to buld a SCART cable for console and old computers
-
A PCB for creating Amiga SCART or Amiga VGA cables. You can also use this adapter to feed a new clock to the Amiga via XCLK making your machine true PAL/NTSC switchable
-
This is a small PCB to adapt an A500 Keyboard to an Amiga Bigbox Keyboard cable (or just to break out the signals.)
-
tebl/Amiga-Mouse-Switch github
An attempt at building an automatic Amiga Mouse/Joystick switch (when used with Amiga port 1) - pushing the button changes the device connected. No more two-cable Merengue for me on the Amiga 500, forever more!
-
ENC28J60 Ethernet Module for Vampire
-
Amiga Footprints for KiCad 7.0
-
arnljot/dataflyer2650 github
DataFlyer2650: 26-pin to 50-pin SCSI adapter for the DataFlyer 1200 SCSI+ and Phase5 Blizzard IV SCSI kit (KiCad 10, CERN-OHL-S-2.0)
-
1c3d1v3r/Dogbone64 github
Replacement PCB for NES Dogbone controller. Amiga & Commodore 64 compatible.
-
SD Card Adapter for Vampire
-
A small back panel PCB to house HDMI and several switches...
-
ChrisHaller/Amiga-P1 github
FPGA based portable Amiga with display and wireless keyboard, mouse, joystick
-
With this adapter you can connect Amiga CD32 gamepads and Commodore/Amiga/Atari joysticks to a PC, Raspberry PI, MiSTer FPGA etc.
-
HenrykRichter/a1200hddled gitlab
This little PCB allows to inject the activity signal of a second source into the HDD LED indicator of Amiga 1200 computers.
-
Recreation of the original Amiga 1000 PCB
-
farm-ng/amiga-dev-kit github
Amiga development kit for third party hardware or software extensions.
-
A utilty to test an Amiga (A500) keyboard using an Arduino Uno
-
opengiveback/eqUInput github
eqUInput is a PCB for Arduino Nano based PS/2 mouse or PC Gameport joysticks to Amiga mouse adapters
-
autumnhippo/joystick-tester gitlab
Simple PCB to test Commodore 64/Amiga style joysticks
-
tebl/Amiga-DrawBridge github
A PCB build of Rob Smiths Amiga DrawBridge, an Arduino-based solution for reading and writing Amiga floppy disks on modern hardware. Also includes a version of Greaseweazle.
-
derfsss/MCP-AmigaOS4 github
MCP server for driving AmigaOS 4.1 machines (QEMU + real hardware) via Model Context Protocol
-
creep-ltx/wasabi github
Drive a real Amiga from Linux and watch it think: deploy, run, and stream serial debug + SnoopDOS-style call traces over TCP
-
rkrajnc/minimig-mist github
Minimig for the MiST board
-
matsstaff/AmigaResetSwitch github
Amiga DF0: / DF1: (_SEL0/_SEL1) internal automatic drive switch using Arduino Pro Mini and minimal hardware.
-
KONEY/dsr_amiga_vhs github
VHS FX using Amiga Hardware
-
Safely connect your Sega Mega Drive/Genesis controllers to your Commodore 64 or Amiga