Open source projects 32 subscribe: Atom · RSS (this filter)
Starting a project? Describe it first: the closest existing projects, by meaning, so nobody builds the same thing twice.
-
Adapter to allow the use of the A500+/A600 Agnus (390544 8375 ) in an Amiga A3000
-
opengiveback/eqUInput github
eqUInput is a PCB for Arduino Nano based PS/2 mouse or PC Gameport joysticks to Amiga mouse adapters
-
With this adapter you can connect Amiga CD32 gamepads and Commodore/Amiga/Atari joysticks to a PC, Raspberry PI, MiSTer FPGA etc.
-
dpks2003/tang9k_amiga github
Emulating Amiga and Motorola 6000 on tang FPGA
-
Reproduction of the PCB for an Ashcom 512kb memory expansion, for Amiga 500s
-
arvvoid/a500kybhid github
This Arduino sketch converts an original Amiga 500 keyboard into a USB HID, allowing it to function as a modern USB keyboard. The sketch reads the Amiga 500 keyboard signals and translates them into USB keystrokes,...
-
AmigaPorts/stm_rtc github
STM32 emulator of msm6264b RTC for Amiga computers
-
A utilty to test an Amiga (A500) keyboard using an Arduino Uno
-
tops4u/Ram-Tester github
Ram Tester for vintage CBM Computer RAM Chips
-
asig/amiga-mouse-adapter github
A short Arduino Sketch that transforms an Amiga Joystick to a mouse.
-
An arcade controller project for the MiSTer FPGA project and any other device accepting USB HID joysticks. Up to 12 buttons are supported. Can also be used to create NeoGeo/Atari/Commodore/Amiga controller to USB adapters.
-
1c3d1v3r/Dogbone64 github
Replacement PCB for NES Dogbone controller. Amiga & Commodore 64 compatible.
-
Recreation of the original Amiga 1000 PCB
-
A optical mouse replacement pcb for the Amiga pregnant mouse
-
OlegMishin/GotekFlashFloppy github
A Gotek based compact PCB for Amiga
-
jbilander/ReAgnus github
A drop-in replacement PCB for the Amiga Agnus chip
-
Amiga 1200 Kickstart Relocator PCB
-
jbilander/SF500 github
Spitfire 500, A low-end 14 MHz Accelerator with IDE and 4/8 MB fast RAM for the Amiga 500.
-
jbilander/SF2000 github
Spitfire 2000, A low-end 42 MHz Accelerator with IDE and 4/8 MB fast RAM for the Amiga 2000 co-pro slot (or A500 through an adapter).
-
Reverse enginiered schematics for Amiga 2000 GVP Combo 040 accelerator board
-
aliastra/Amiga-600-Rev-2A github
Amiga 600 Rev2A Gerber files converted from SVG data at amigapcb.org
-
aliastra/Amiga-4000T-Rev4 github
Amiga 4000T Rev4 Gerber files converted from SVG data at amigapcb.org
-
A PCB for creating Amiga SCART or Amiga VGA cables. You can also use this adapter to feed a new clock to the Amiga via XCLK making your machine true PAL/NTSC switchable
-
arnljot/dataflyer2650 github
DataFlyer2650: 26-pin to 50-pin SCSI adapter for the DataFlyer 1200 SCSI+ and Phase5 Blizzard IV SCSI kit (KiCad 10, CERN-OHL-S-2.0)
-
reinauer/68040-to-68060 github
Motorola 68040 to 68060 adapter