Closest projects to a500-sd-plus-controller in the index. If they solve the same problem,
the maintainers may gain more from collaborating than from building in parallel.
-
SD-card and Ethernet drivers for the Amiga 500 Simple SPI controller.
-
Simple SPI controller for Amiga 500 with support for SD-cards and Ethernet controller
-
A cheap 68EC020 turbocard for the Amiga with 16MB RAM and IDE
-
A cheap 68EC020 turbocard for the Amiga with 16MB RAM and IDE
-
A cheap 68EC020 turbocard for the Amiga with 16MB RAM and IDE
-
A cheap 68EC020 turbocard for the Amiga with 16MB RAM and IDE
-
An SMD verson of the great Amiga 500
-
Recreated board for the SD card reader on parallel port for Amiga computers by jbilander and niklasekstrom
-
Amiga 500 8MB FastRAM and IDE interface
-
8MB FastRAM and BSC-AT-Bus IDE controller for Amiga 500
-
Amiga Zorro-II Bus Cards using nothing but an RPi Pico to interact with the bus
-
My personal rev. of Amiga SD-BOX
-
This project contains I2C (TWI) hardware interfaces and a shared library for convenient access to I2C sensors connected to classic 68k Amiga computers.
-
This project contains I2C (TWI) hardware interfaces and a shared library for convenient access to I2C sensors connected to classic 68k Amiga computers.
-
Assembling an SDNet device for Amiga with a Vampire accelerator. Mirror of https://framagit.org/epifanio/sdnet
-
BETA - Experimental USB 3.0 (xHCI) host stack for AmigaOS 4.1 on the X5000 - usb3.device. Drives a Renesas uPD720202 PCIe card alongside the stock USB stack. Based on Rene W. Olsen's usb2 stack.
-
This is the i2c bus driver für the Amiga 1200+ re-implementation ( http://www.amigaclub.be/projects/amiga1200plus )
-
Amiga Cheetah UW SCSI controller
-
SANA-II network driver for the ENC28J60 Ethernet controller on the A500-SD-Plus