Closest projects to Amiga-SMD-500 in the index. If they solve the same problem,
the maintainers may gain more from collaborating than from building in parallel.
-
An SMD verson of the great Amiga 500
-
A mini-DTX version of the Amiga 2000 (motherboard)
-
A 1MB chip RAM expansion for the A500+
-
8MB FastRAM Board for the Amiga 500 & Amiga 500+
-
Compact Flash HDD and 8MB Fast RAM side-port expansion for Amiga 500
-
Amiga 500 8MB FastRAM and IDE interface
-
Replace the old 44256 DRAM chips on your A500 with newer SRAM memory
-
Amiga 600 Accelerator And RAM Expansion
-
Improved design attempt for Amiga 500 in socket 68000 Accelerator, FastRAM and IDE Interface
-
Inexpensive A500 hard disk interface
-
A board to replace the memory in an Amiga 500+ with a 1Mx16 DRAM for a total of 2MB chip ram
-
Amiga 2000 revision 6.2 motherboard re-done in KiCAD. WARNING: stability issue with Wicher 500i, could be noise related from accelerator speed.
-
-
Amiga 500 Mitsumi Keyboard Controller
-
Open Hardware Remake of the Commodore Amiga 500+ Mainboard
-
SD-card plus Ethernet controller for the Amiga 500
-
Allows use of regular EPROMS on Amiga 500 Rev 5 boards
-
A "brain transplant" for the Amiga 500, replacing its motherboard with a modern single-board computer while preserving the original keyboard, joystick ports, and LED drive indicators.
-
Amiga DRAM chip tester with Arduino UNO
-
During 2025 I decided to build an Amiga 500+ clone, this details the build and hopefully provides some advice to others who want to take on the project. This was only my second build and proved a bit of a challenge.
-
Siliconix Amiga 500 2MB ChipRAM No GARY Adapter
-
Luma Chroma output from A500
-
Amiga 1000 SCSI sidecar adapter
-
-
Verilog code to replace the Commodore SDMAC found in the A3000
-
My build of the Amiga 500
-
A side case for the Commodore Amiga 500 inspired by its original case.
-
-
-
I’m going to try to bring an Amiga 600 back to life – its capacitors have failed – using a new motherboard
-
I’m going to try to bring an Amiga 600 back to life – its capacitors have failed – using a new motherboard
-
-
Here lies the all the information you need to finally make the obvious choice to purchase the Commodore Amiga 500!
-
3D-Printable Samsung SFD-321 eject button adapted to the Commodore Amiga 600