Closest projects to A2286AT in the index. If they solve the same problem,
the maintainers may gain more from collaborating than from building in parallel.
-
-
-
-
-
-
Big Box Amiga Action Replay III remake
-
Amiga 4000 Replica project. Based on the A4000 Rev B and funded by Paul Rezendes and the generous contributions of the Amiga Community.
-
Amiga Action Replay III remake
-
Reverse engineering exercise
-
Amiga 2000 revision 6.2 motherboard re-done in KiCAD. WARNING: stability issue with Wicher 500i, could be noise related from accelerator speed.
-
Amiga A500+ Rev 8A.2
-
-
Open Hardware Remake of the Commodore Amiga 500+ Mainboard
-
Tools to repair Amiga machines
-
The reverse engineered schematics for the Action Replay II/III for the Amiga. The eventual end goal of this project is to reimplement the PALs in FPGA or with modern components.
-
Recreation of the original Amiga 1000 PCB
-
Recreating retro computer schematics in KiCAD
-
A PCB build of Rob Smiths Amiga DrawBridge, an Arduino-based solution for reading and writing Amiga floppy disks on modern hardware. Also includes a version of Greaseweazle.
-
Verilog code to replace the Commodore SDMAC found in the A3000
-
A re-implementation of the Amiga Bridgette chip.
-
Amiga A600 schematics recpatured in KiCad and a new PCB design from them. Base version
-
A flexible trapdoor extension for the AMIGA 500
-
PARTY Land Remake - Building a real-life playfield replica of the PARTY Land pinball table from the Amiga game Pinball Fantasies
-
EagleCAD-library for Commodore Amiga custom chips
-
EagleCAD-library for Commodore Amiga custom chips
-
1.8MB/2MB Trapdoor expansion for the Amiga 500
-
Attempt to remake the Commodore Amiga A2320 Video flicker fixer card
-
Fork of https://codeberg.org/RevK/ESP32-RevK — continues Sonic-Amiga (Pavel Fedin) ESP8266 port; ESP8266 build fixes on branch esp8266
-
Action Replay MK3 For DeniseITX (Based Of Demon Card Project for Amiga)