Closest projects to A500_IDE_LED_board in the index. If they solve the same problem,
the maintainers may gain more from collaborating than from building in parallel.
-
This is a simple adapter for the Amiga 500 which routes the IDE activity signal to the keyboard Floppy LED. Floppy activity will still be shown normally.
-
An open source flicker fixer PCB for Amiga 1200 and 500
-
Extend your amiga RGB video signal to two display units - screens, monitors, etc, simultaneously
-
Amiga 4000D IDE Expansion
-
A parallel to ESP32 project for the Amiga
-
raspberry pi amiga drive
-
A parallel to Pico 2 W and sd-card project for the Amiga
-
Big Box Amiga Action Replay III remake
-
A simple interface for standard PC Floppy Disk Drive and Amiga Computers
-
pimp your Amiga
-
SPIder is an adapter that interfaces SPI devices to the clockport on an Amiga
-
Amiga 1200 LED Header for Vampire 4 Standalone
-
Amiga A500 keyboard HDD LED mod
-
-
A small back panel PCB to house HDMI and several switches...
-
This little PCB allows to inject the activity signal of a second source into the HDD LED indicator of Amiga 1200 computers.
-
Very low profile vidiot modules for Amiga
-
Buffered IDE2CF adapter for Amiga 1200, TF1260 and others
-
A simple 90-degree side expansion slot adapter that I'm using in my Amiga 500 tower build.
-
-
Forked and changed this arduino tetris code to work on a P10 led panel (32x16) with an amiga joystick
-
ENC28J60 Ethernet Module for Vampire