Closest projects to BeamBender in the index. If they solve the same problem,
the maintainers may gain more from collaborating than from building in parallel.
-
Extend your amiga RGB video signal to two display units - screens, monitors, etc, simultaneously
-
Amiga 500 Floppy LED to also Display IDE Activity
-
A parallel to ESP32 project for the Amiga
-
pimp your Amiga
-
A parallel to Pico 2 W and sd-card project for the Amiga
-
A simple interface for standard PC Floppy Disk Drive and Amiga Computers
-
raspberry pi amiga drive
-
Adapter that allows external connection of floppy disk or Gotek drives
-
An AGA digital scandoubler and HDMI output card for the Amiga 4000, with Amiga 2000 / 3000 support.
-
Big Box Amiga Action Replay III remake
-
A drop-in replacement PCB for the Amiga Agnus chip
-
Spitfire 2000, A low-end 42 MHz Accelerator with IDE and 4/8 MB fast RAM for the Amiga 2000 co-pro slot (or A500 through an adapter).
-
SPIder is an adapter that interfaces SPI devices to the clockport on an Amiga
-
Here is a Picasso 4MB Flicker Fixed for Amiga 2000, 3000 and 4000
-
Amiga 500 PC AT 286 emulator board
-
-
Amiga 500 Mitsumi Keyboard Controller
-
Amiga +5V from external D-sub DB23 floppy drive port to USB Receptacle Type C
-
Very low profile vidiot modules for Amiga
-
[WIP] Modern Amiga 1200 clone implementation using Cyclone V FPGA
-
My build of the Amiga 500
-
Voltage Regulator PCB for Apollo 1260 accelarator card
-