Closest projects to AmigaPCDriveAdapter in the index. If they solve the same problem,
the maintainers may gain more from collaborating than from building in parallel.
-
Adapter that allows external connection of floppy disk or Gotek drives
-
I2C (TWI) Controller for the Floppy port on Commodore Amiga Computers
-
A few simple AMIGA related PCBs.
-
Open Hardware Floppy Drive Swapper for Amiga Computers
-
Amiga USB Floppy Disk Reader
-
An Amiga 1000-500-2000-3000 DF0: - External Floppy Drive Swapper
-
External floppy emulator for Amiga computers. Based on OpenFlops, which is inspired by Gotek.
-
Adapts a regular PC floppy drive for high density operation on an Amiga computer
-
An open source flicker fixer PCB for Amiga 1200 and 500
-
Connect two floppy drives inside an Amiga computer and choose which one to boot from
-
Amiga 7 segment floppy drive display monitor
-
This is a simple adapter for the Amiga 500 which routes the IDE activity signal to the keyboard Floppy LED. Floppy activity will still be shown normally.
-
Inexpensive A500 hard disk interface
-
Amiga 4000D IDE Expansion
-
Yet Another (Amiga) FDD Swapper
-
Converts PC floppy drive interface to Amiga/Shugart bus interface. Now also supports the Atari ST/TT.
-
raspberry pi amiga drive
-
FlashFloppy and FF_OSD, and now Amiga-dual-floppy-selector on a single board, for the Amiga 600
-
Genesis/MegaDrive gamepad to C64/Amiga adapter, with 3 button support and switchable button map
-
USB floppy controller for Amiga disks
-
Amiga Video Slot to HDMI Adapter
-
Amiga 500 6A Dual Internal Floppy Drive Interface
-
Here is a Picasso 4MB Flicker Fixed for Amiga 2000, 3000 and 4000
-
Amiga 500 Floppy LED to also Display IDE Activity
-
DataFlyer2650: 26-pin to 50-pin SCSI adapter for the DataFlyer 1200 SCSI+ and Phase5 Blizzard IV SCSI kit (KiCad 10, CERN-OHL-S-2.0)
-
A USB keyboard adapter for the Amiga 2000 based on the Pi Stamp RP2040
-
PLCC to DIP Adapters for Amiga Computers
-
Amiga 600 PLCC to 64pin DIP CPU Adaptor
-
Cheap "Action Replay" clone for Amiga 500/2000
-
-
A USB keyboard adapter for the Amiga 500 based on the RP2040 for JLCPCB Assembly
-
4 ATA/ATAPI IDE Interface for Commodore Amiga 1200 and Amiga 600 computers
-
Amiga +5V from external D-sub DB23 floppy drive port to USB Receptacle Type C
-
An usb to serial debug board for Amiga
-
Amiga 500 PC AT 286 emulator board
-
-
Nick's Disk Controller, project to interface and read floppy disks for example from an Amiga.
-
Adapter to allow the use of the A500+/A600 Agnus (390544 8375 ) in an Amiga A3000
-
Amiga 1200 LED Header for Vampire 4 Standalone
-
An Amiga Serial Midi Interface in open hardware
-
Allow standard PC floppy drives to be used with an Amiga
-
Amiga 1000 and Amiga A1010 3.5" Gotek Drive Mount
-
-
-
A parallel to sd-card project for the Amiga
-
-
ATX power adaptors for the Amiga and other retro computers. Allows easy access to an ATX replacement supply
-
Supra Corp Amiga Floppy 30-0065-2 Schematics and PAL
-
-
-
Amiga 1000 SCSI sidecar adapter
-
Replacement PCB for NES Dogbone controller. Amiga & Commodore 64 compatible.
-
Amiga Action Replay III remake
-
A 16f84 adapter for using a PSX pad on Amiga/CD32
-
External floppy drive interface for Amiga
-
Backplate board to enable standard PC floppy to operate as an Amiga Floppy Drive
-
Clone of the AlfaData CD1200+ PCMCIA IDE Interface for Amiga Computers
-
A small PCB done with KiCAD for my Amiga A1012 double floppy project
-
The plipbox Arduino HW Adapter to bridge Amiga PLIP to Ethernet
-
A small mod board to provide a DSKRDY signal for drives which don't supply one
-
Emulating Amiga and Motorola 6000 on tang FPGA
-
Motorola 68040 to 68060 adapter
-
This adapter plugs into the rear of the Amiga 1000 on the parallel port to change the pinout for non-Amiga 1000 parallel devices.
-
Raw Floppy Writer using STM32F4Discovery. Supports Amiga, Atari ST, C64 Images. Even copy protected.
-
A label maker program for 3.5" floppy disks for the Amiga written in 100% assembly.
-
-
Pequeño PCB que permite sustituir la batería original de los Amiga 4000 ( o similares) y en su lugar colocar una litio (CR2032)
-
Laptop meets Amiga, Meets Commodore. I'm documenting how I've turned an old gaming laptop collecting dust in my closet into a Cyberdeck. I needed a computer that I could take with me to college.
-
This project provides the design and documentation of a ZIP-to-DIL (ZIP2DIL) adapter for testing ZIP-package RAMs, specifically types 44256, 44000, or compatible DRAMs, using a standard memory tester.
-
DIP14/DIP8 adapter for SMD oscillators in retro computer systems
-
-
This is a DCF77 module adaptor for the Amiga serial port. It will works with all DCF77 modules between 1.5v-3.3v and 5V on the market.
-
Connect your Amiga to Palm PDAs
-
LL530 is an adapter that lets you connect Amiga Keyboard/Mouse and Atari controllers over USB.
-
Fast parallel data transfer from Amiga to attached MCU
-
-
Reproduction of the Amiga CDTV front panel in KiCAD