Closest projects to amiga-goodies in the index. If they solve the same problem,
the maintainers may gain more from collaborating than from building in parallel.
-
A simple interface for standard PC Floppy Disk Drive and Amiga Computers
-
Amiga USB Floppy Disk Reader
-
Yet Another (Amiga) FDD Swapper
-
An Amiga 1000-500-2000-3000 DF0: - External Floppy Drive Swapper
-
Amiga 2000 revision 6.2 motherboard re-done in KiCAD. WARNING: stability issue with Wicher 500i, could be noise related from accelerator speed.
-
Amiga Input & Output Devices and Test Code.
-
Cheap "Action Replay" clone for Amiga 500/2000
-
Inexpensive A500 hard disk interface
-
Open Hardware Floppy Drive Swapper for Amiga Computers
-
A small PCB done with KiCAD for my Amiga A1012 double floppy project
-
Amiga parts for KiCad
-
Amiga Midi Device
-
This is a 4 way Amiga ROM switcher built using a low profile solution. Tested on the Amiga 600.
-
Amiga 3000 ROM bank switcher for U180/U181 sockets allowing 27C800, 27C160, and MX29F1615 parts to be installed and easily switch between chunks using jumpers or switches
-
My personal open source Amiga works (A1200 PSU schematic, etc)
-
Arcadia Systems Amiga 500 based arcade PCB related files/projects
-
AmigaPCI STM32 firmware
-
Supra Corp Amiga Floppy 30-0065-2 Schematics and PAL
-
FPGA based portable Amiga with display and wireless keyboard, mouse, joystick
-
Key-Tap. Use keyboard hotkeys to configure internal hardware extensions in the Amiga 500.
-
Amiga Footprints for KiCad 7.0
-
Web based Amiga computers chip explorer - see each signal on each pin
-
DIP14/DIP8 adapter for SMD oscillators in retro computer systems
-