Closest projects to Amiga-External-Floppy-Adapter in the index. If they solve the same problem,
the maintainers may gain more from collaborating than from building in parallel.
-
A simple interface for standard PC Floppy Disk Drive and Amiga Computers
-
An Amiga 1000-500-2000-3000 DF0: - External Floppy Drive Swapper
-
-
Connect two floppy drives inside an Amiga computer and choose which one to boot from
-
Open Hardware Floppy Drive Swapper for Amiga Computers
-
Genesis/MegaDrive gamepad to C64/Amiga adapter, with 3 button support and switchable button map
-
Amiga 500 6A Dual Internal Floppy Drive Interface
-
External floppy emulator for Amiga computers. Based on OpenFlops, which is inspired by Gotek.
-
An open source flicker fixer PCB for Amiga 1200 and 500
-
Amiga 4000D IDE Expansion
-
This is a simple adapter for the Amiga 500 which routes the IDE activity signal to the keyboard Floppy LED. Floppy activity will still be shown normally.
-
raspberry pi amiga drive
-
A Gotek based compact PCB for Amiga
-
I2C (TWI) Controller for the Floppy port on Commodore Amiga Computers
-
Amiga 7 segment floppy drive display monitor
-
Amiga DF0: / DF1: (_SEL0/_SEL1) internal automatic drive switch using Arduino Pro Mini and minimal hardware.
-
Adapts a regular PC floppy drive for high density operation on an Amiga computer
-
Amiga +5V from external D-sub DB23 floppy drive port to USB Receptacle Type C
-
Adapter to allow the use of the A500+/A600 Agnus (390544 8375 ) in an Amiga A3000
-
Connect up to four joysticks to your Amiga!
-
Amiga 500 PC AT 286 emulator board
-
-
A breakout/riser board for the CD32, based on the Terriblefire design. Added extra video circuitry, some power supply essentials, PC to Amiga keyboard adaptor and an RS232 serial port.
-
Converts PC floppy drive interface to Amiga/Shugart bus interface. Now also supports the Atari ST/TT.
-
-
Buffered IDE2CF adapter for Amiga 1200, TF1260 and others
-
-
Supra Corp Amiga Floppy 30-0065-2 Schematics and PAL
-
An Amiga Serial Midi Interface in open hardware
-
DataFlyer2650: 26-pin to 50-pin SCSI adapter for the DataFlyer 1200 SCSI+ and Phase5 Blizzard IV SCSI kit (KiCad 10, CERN-OHL-S-2.0)
-
Amiga 1000 and Amiga A1010 3.5" Gotek Drive Mount
-
-
A little PCB to buld a SCART cable for console and old computers
-
An internal Gotek mounting bracket for Amiga 500 designed in DesignSpark V4
-
Super Nintendo Controller -> Commodore 64/Amiga 9-pin controller port
-
External board initally meant to provide an external board for Goteks in Amiga 500.
-
A flexible trapdoor extension for the AMIGA 500